Contact lens
Contact lenses, or simply contacts, are thin lenses placed directly on the surface of the eyes. Contact lenses are ocular prosthetic devices used by over 150 million people worldwide,[1] and they can be worn to correct vision or for cosmetic or therapeutic reasons.[2] In 2010, the worldwide market for contact lenses was estimated at $6.1 billion, while the US soft lens market was estimated at $2.1 billion.[3] Multiple analysts estimated that the global market for contact lenses would reach $11.7 billion by 2015.[3] As of 2010[update], the average age of contact lens wearers globally was 31 years old, and two-thirds of wearers were female.[4]
People choose to wear contact lenses for many reasons.[5] Aesthetics and cosmetics are main motivating factors for people who want to avoid wearing glasses or to change the appearance or color of their eyes.[6] Others wear contact lenses for functional or optical reasons.[7] When compared with spectacles, contact lenses typically provide better peripheral vision, and do not collect moisture (from rain, snow, condensation, etc.) or perspiration. This can make them preferable for sports and other outdoor activities. Contact lens wearers can also wear sunglasses, goggles, or other eyewear of their choice without having to fit them with prescription lenses or worry about compatibility with glasses. Additionally, there are conditions such as keratoconus and aniseikonia that are typically corrected better with contact lenses than with glasses.[8]
History
[edit]Origins and first functional prototypes
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/d/d6/Da_Vinci%27s_method_of_corneal_neutralization.jpg/150px-Da_Vinci%27s_method_of_corneal_neutralization.jpg)
Leonardo da Vinci is frequently credited with introducing the idea of contact lenses in his 1508 Codex of the eye, Manual D,[9] wherein he described a method of directly altering corneal power by either submerging the head in a bowl of water or wearing a water-filled glass hemisphere over the eye. Neither idea was practically implementable in da Vinci's time.[10]: 9 He did not suggest his idea be used for correcting vision; he was more interested in exploring mechanisms of accommodation.[9]
Descartes proposed a device for correcting vision consisting of a liquid-filled glass tube capped with a lens. However, the idea was impracticable, since the device was to be placed in direct contact with the cornea and thus would have made blinking impossible.[11]
In 1801, Thomas Young fashioned a pair of basic contact lenses based on Descartes' model. He used wax to affix water-filled lenses to his eyes, neutralizing their refractive power, which he corrected with another pair of lenses.[10][11]
Sir John Herschel, in a footnote to the 1845 edition of the Encyclopedia Metropolitana, posed two ideas for the visual correction: the first "a spherical capsule of glass filled with animal jelly",[12] the second "a mould of the cornea" that could be impressed on "some sort of transparent medium".[13] Though Herschel reportedly never tested these ideas, they were later advanced by independent inventors, including Hungarian physician Joseph Dallos, who perfected a method of making molds from living eyes.[14] This enabled the manufacture of lenses that, for the first time, conformed to the actual shape of the eye.[15]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Adolf_Fick-adjust.png/185px-Adolf_Fick-adjust.png)
Although Louis J. Girard invented a scleral contact lens in 1887,[16] it was German ophthalmologist Adolf Gaston Eugen Fick who in 1888 fabricated the first successful afocal scleral contact lens.[17] Approximately 18–21 mm (0.71–0.83 in) in diameter, the heavy blown-glass shells rested on the less sensitive rim of tissue surrounding the cornea and floated on a dextrose solution. He experimented with fitting the lenses initially on rabbits, then on himself, and lastly on a small group of volunteers, publishing his work, "Contactbrille", in the March 1888 edition of Archiv für Augenheilkunde.[18] Large and unwieldy, Fick's lens could be worn only for a couple of hours at a time.[19] August Müller of Kiel, Germany, corrected his own severe myopia with a more convenient blown-glass scleral contact lens of his own manufacture in 1888.[20]
The development of polymethyl methacrylate (PMMA) in the 1930s paved the way for the manufacture of plastic scleral lenses. In 1936, optometrist William Feinbloom introduced a hybrid lens composed of glass and plastic,[21] and in 1937 it was reported that some 3,000 Americans were already wearing contact lenses.[22] In 1939, Hungarian ophthalmologist Dr.István Györffy produced the first fully plastic contact lens.[23] The following year, German optometrist Heinrich Wöhlk produced his own version of plastic lenses based on experiments performed during the 1930s.[24]
Corneal and rigid lenses (1949–1960s)
[edit]In 1949, the first "corneal" lenses were developed.[25][26][27][28] These were much smaller than the original scleral lenses, as they sat only on the cornea rather than across all of the visible ocular surface and could be worn up to 16 hours a day. PMMA corneal lenses became the first contact lenses to have mass appeal through the 1960s, as lens designs became more sophisticated with improving manufacturing technology.[29] On October 18, 1964, in a television studio in Washington, D.C., Lyndon Baines Johnson became the first President in the history of the United States to appear in public wearing contact lenses, under the supervision of Dr. Alan Isen, who developed the first commercially viable soft-contact lenses in the United States.[30][31][32]
Early corneal lenses of the 1950s and 1960s were relatively expensive and fragile, resulting in the development of a market for contact lens insurance. Replacement Lens Insurance, Inc. (now known as RLI Corp.) phased out its original flagship product in 1994 after contact lenses became more affordable and easier to replace.[citation needed]
Gas permeable and soft lenses (1959-current)
[edit]One of the major disadvantages of PMMA lenses is that they allow no oxygen to get through to the conjunctiva and cornea, causing a number of adverse and potentially serious clinical effects. By the end of the 1970s and through the 1980s and 1990s, a range of oxygen-permeable but rigid materials were developed to overcome this problem. Chemist Norman Gaylord played a prominent role in the development of these new oxygen-permeable contact lenses.[33] Collectively, these polymers are referred to as rigid gas permeable or RGP materials or lenses. Though all the above contact lens types—sclerals, PMMAs and RGPs—could be correctly referred to as "rigid" or "hard", the latter term is now used for the original PMMAs, which are still occasionally fitted and worn, whereas "rigid" is a generic term for all these lens types; thus, hard lenses (PMMAs) are a subset of rigid contact lenses. Occasionally, the term "gas permeable" is used to describe RGPs, which is somewhat misleading as soft contact lenses are also gas permeable in that they allow oxygen to get through to the ocular surface.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/48/Prof._Ing._RTDr._Otto_Wichterle.jpg/170px-Prof._Ing._RTDr._Otto_Wichterle.jpg)
The principal breakthrough in soft lenses was made by Czech chemists Otto Wichterle and Drahoslav Lím, who published their work "Hydrophilic gels for biological use" in the journal Nature in 1959.[34] In 1965, National Patent Development Corporation (NPDC) bought the American rights to produce the lenses and then sublicensed the rights to Bausch & Lomb, which started to manufacture them in the United States.[35] The Czech scientists' work led to the launch of the first soft (hydrogel) contact lenses in some countries in the 1960s and the first approval of the Soflens material by the US Food and Drug Administration (FDA) in 1971. These soft lenses were soon prescribed more often than rigid ones, due to the immediate and much greater comfort (rigid lenses require a period of adaptation before full comfort is achieved). Polymers from which soft lenses are manufactured improved over the next 25 years, primarily in terms of increasing oxygen permeability, by varying the ingredients. In 1972, British optometrist Rishi Agarwal was the first to suggest disposable soft contact lenses.[36][37]
In 1998, the first silicone hydrogel contact lenses were released by Ciba Vision in Mexico. These new materials encapsulated the benefits of silicone which has extremely high oxygen permeability—with the comfort and clinical performance of the conventional hydrogels that had been used for the previous 30 years. These contact lenses were initially advocated primarily for extended (overnight) wear, although more recently, daily (no overnight) wear silicone hydrogels have been launched.
In a slightly modified molecule, a polar group is added without changing the structure of the silicone hydrogel. This is referred to as the Tanaka monomer because it was invented and patented by Kyoichi Tanaka of Menicon Co. of Japan in 1979. Second-generation silicone hydrogels, such as galyfilcon A (Acuvue Advance, Vistakon) and senofilcon A (Acuvue Oasys, Vistakon), use the Tanaka monomer. Vistakon improved the Tanaka monomer even further and added other molecules, which serve as an internal wetting agent.[38]
Comfilcon A (Biofinity, CooperVision) was the first third-generation polymer. Its patent claims that the material uses two siloxy macromers of diverse sizes that, when used in combination, produce very high oxygen permeability (for a given water content). Enfilcon A (Avaira, CooperVision) is another third-generation material that is naturally wettable; its water content is 46%.[38]
Types
[edit]Contact lenses are classified in diverse ways: by their primary function, material, wear schedule (how long a lens can be worn), and replacement schedule (how long before a lens needs to be discarded).
Functions
[edit]Correction of refractive error
[edit]Corrective contact lenses are designed to improve vision, most commonly by correcting refractive error. This is done by directly focusing light so it enters the eye with the proper power for clear vision.
A spherical contact lens bends light evenly in every direction (horizontally, vertically, etc.). They are typically used to correct myopia and hypermetropia.
There are two ways that contact lenses can correct astigmatism. One way is with toric soft lenses that work essentially the same way as eyeglasses with cylindrical correction; a toric lens has a different focusing power horizontally than vertically, and as a result can correct for astigmatism. Another way is by using a rigid gas permeable lens; since most astigmatism is caused by the shape of the cornea, rigid lenses can improve vision because the front surface of the optical system is the perfectly spherical lens.[39] Both approaches have advantages and drawbacks. Toric lenses must have the proper orientation to correct for astigmatism, so such lenses must have additional design characteristics to prevent them from rotating out of alignment. This can be done by weighting the bottom of the lens or by using other physical characteristics to rotate the lens back into position, but these mechanisms rarely work perfectly, so some misalignment is common and results in somewhat imperfect correction, and blurring of sight after blinking rotates the lens. Toric soft lenses have all the advantages of soft lenses in general, which are low initial cost, ease of fitting, and minimal adjustment period. Rigid gas permeable lenses usually provide superior optical correction but have become less popular relative to soft lenses due to higher initial costs, longer initial adjustment period, and more involved fitting.[40][41]
Correction of presbyopia
[edit]Correction of presbyopia (a need for a reading prescription different from the prescription needed for distance) presents an additional challenge in the fitting of contact lenses. Two main strategies exist: multifocal lenses and monovision.
Multifocal contact lenses (e.g. bifocals or progressives) are comparable to spectacles with bifocals or progressive lenses because they have multiple focal points. Multifocal contact lenses are typically designed for constant viewing through the center of the lens, but some designs do incorporate a shift in lens position to view through the reading power (similar to bifocal glasses).
Monovision[42] is the use of single-vision lenses (one focal point per lens) to focus an eye (typically the dominant one) for distance vision and the other for near work. The brain then learns to use this setup to see clearly at all distances. A technique called modified monovision uses multifocal lenses and also specializes one eye for distance and the other for near, thus gaining the benefits of both systems. Care is advised for persons with a previous history of strabismus and those with significant phorias, who are at risk of eye misalignment under monovision.[43] Studies have shown no adverse effect to driving performance in adapted monovision contact lens wearers.[44]
Alternatively, a person may simply wear reading glasses over their distance contact lenses.
Other types of vision correction
[edit]For those with certain color deficiencies, a red-tinted "X-Chrom" contact lens may be used. Although such a lens does not restore normal color vision, it allows some color-blind people to distinguish colors better.[45][46] Red-filtering contact lenses can also be an option for extreme light sensitivity in some visual deficiencies such as achromatopsia.[47]
ChromaGen contact lenses have been used and shown to have some limitations with vision at night although otherwise producing significant improvements in color vision.[48] An earlier study showed very significant improvements in color vision and patient satisfaction.[49]
Later work that used these ChromaGen lenses with people with dyslexia in a randomised, double-blind, placebo-controlled trial showed highly significant[clarification needed] improvements in reading ability over reading without the lenses.[50] This system has been granted FDA approval for use in the United States.[51]
Magnification is another area being researched for future contact lens applications.[52] Embedding of telescopic lenses and electronic components suggests that future uses of contact lenses may become extremely diverse.
Cosmetic contact lenses
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/Contact_Grain.jpg/200px-Contact_Grain.jpg)
A cosmetic contact lens is designed to change the appearance of the eye. These lenses may also correct refractive error. Although many brands of contact lenses are lightly tinted to make them easier to handle, cosmetic lenses worn to change eye color are far less common, accounting for only 3% of contact lens fits in 2004.[53]
In the United States, the FDA labels non-corrective cosmetic contact lenses as decorative contact lenses. Like any contact lens, cosmetic lenses carry risks of mild to serious complications, including ocular redness, irritation and infection.[54]
Due to their medical nature, colored contact lenses, similar to regular ones, are illegal to purchase in the United States without a valid prescription. Those with perfect vision can buy color contacts for cosmetic reasons, but they still need their eyes to be measured for a "plano" prescription, meaning one with zero vision correction. This is for safety reasons so the lenses will fit the eye without causing irritation or redness.
Some colored contact lenses completely cover the iris, thus dramatically changing eye color. Other colored contact lenses merely tint the iris, highlighting its natural color. A new trend in Japan, South Korea and China is the circle contact lens, which extend the appearance of the iris onto the sclera by having a dark tinted area all around. The result is an appearance of a bigger, wider iris, a look reminiscent of dolls' eyes.[55]
Cosmetic lenses can have more direct medical applications. For example, some contact lenses can restore the appearance and, to some extent the function, of a damaged or missing iris.
Therapeutic scleral lenses
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/Scleral_lens_worn_on_an_eye.jpg/220px-Scleral_lens_worn_on_an_eye.jpg)
A scleral lens is a large, firm, transparent, oxygen-permeable contact lens that rests on the sclera and creates a tear-filled vault over the cornea. The cause of this unique positioning is usually relevant to a specific patient whose cornea is too sensitive to support the lens directly. Scleral lenses may be used to improve vision and reduce pain and light sensitivity for people with disorders or injuries to the eye, such as severe dry eye syndrome (keratoconjunctivitis sicca), microphthalmia, keratoconus, corneal ectasia, Stevens–Johnson syndrome, Sjögren's syndrome, aniridia, neurotrophic keratitis (anesthetic corneas), complications post-LASIK, high order aberrations of the eye, complications post-corneal transplant and pellucid degeneration. Injuries to the eye such as surgical complications, distorted corneal implants, as well as chemical and burn injuries also may be treated with scleral lenses.[56]
Therapeutic soft lenses
[edit]Soft lenses are often used in the treatment and management of non-refractive disorders of the eye. A bandage contact lens allows the patient to see[57] while protecting an injured or diseased cornea[58] from the constant rubbing of blinking eyelids, thereby allowing it to heal.[59] They are used in the treatment of conditions including bullous keratopathy, dry eyes, corneal abrasions and erosion, keratitis, corneal edema, descemetocele, corneal ectasia, Mooren's ulcer, anterior corneal dystrophy, and neurotrophic keratoconjunctivitis.[60] Contact lenses that deliver drugs to the eye have also been developed.[61]
Materials
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/20/Contacteye.png/220px-Contacteye.png)
Rigid lenses
[edit]Glass lenses were never comfortable enough to gain widespread popularity. The first lenses to do so were those made from polymethyl methacrylate (PMMA or Perspex/Plexiglas), now commonly referred to as "hard" lenses. Their main disadvantage is they do not allow oxygen to pass through to the cornea, which can cause a number of adverse, and often serious, clinical events. Starting in the late 1970s, improved rigid materials which were oxygen-permeable were developed. Contact lenses made from these materials are called rigid gas permeable lenses or 'RGPs'.
A rigid lens is able to cover the natural shape of the cornea with a new refracting surface. This means that a spherical rigid contact lens can correct corneal astigmatism. Rigid lenses can also be made as a front-toric, back-toric, or bitoric. Rigid lenses can also correct corneas with irregular geometries, such as those with keratoconus or post surgical ectasias. In most cases, patients with keratoconus see better through rigid lenses than through glasses. Rigid lenses are more chemically inert, allowing them to be worn in more challenging environments where chemical inertia is important compared to soft lenses.[62]
Soft lenses
[edit]Soft lenses are more flexible than rigid lenses and can be gently rolled or folded without damaging the lens. While rigid lenses require a period of adaptation before comfort is achieved, new soft lens wearers typically report lens awareness rather than pain or discomfort.
Hydrogel lenses rely on their water content to transmit oxygen through the lens to the cornea. As a result, higher water content lenses allowed more oxygen to the cornea. In 1998, silicone hydrogel, or Si-hy lenses became available. These materials have both the extremely high oxygen permeability of silicone and the comfort and clinical performance of the conventional hydrogels. Because silicone allows more oxygen permeability than water, oxygen permeability of silicone hydrogels is not tied to the lenses' water content. Lenses have now been developed with so much oxygen permeability that they are approved for overnight wear (extended wear). Lenses approved for daily wear are also available in silicone hydrogel materials.[63]
Current brands of soft lenses are either traditional hydrogel or silicone hydrogel. Because of drastic differences in oxygen permeability, replacement schedule, and other design characteristics, it is very important to follow the instructions of the eye care professional prescribing the lenses.When comparing traditional hydrogel soft lens contacts with silicone hydrogel versions, there is no clear evidence to recommend a superior lens.[64]
Disadvantages of silicone hydrogels are that they are slightly stiffer and the lens surface can be hydrophobic, thus less "wettable" – factors that can influence comfort of lens use. New manufacturing techniques and changes to multipurpose solutions have minimized these effects. Those new techniques are often broken down into 3 generations:[38][65]
- 1st generation (plasma coating): A surface modification process called plasma coating alters the lens surface's hydrophobic nature;
- 2nd generation (wetting agents): Another technique incorporates internal rewetting agents to make the lens surface hydrophilic;
- 3rd generation (inherently wettable): A third process uses longer backbone polymer chains that results in less cross linking and increased wetting without surface alterations or additive agents.
Hybrid
[edit]A small number of hybrid lenses exist. Typically, these contact lenses consist of a rigid center and a soft "skirt". A similar technique is the "piggybacking" of a smaller, rigid lens on the surface of a larger, soft lens. These techniques are often chosen to give the vision correction benefits of a rigid lens and the comfort of a soft lens.[66]
Wear schedule
[edit]A "daily wear" (DW) contact lens is designed to be worn for one day and removed before sleeping. An "extended wear" (EW) contact lens is designed for continuous overnight wear, typically for up to 6 consecutive nights.[67] Newer materials, such as silicone hydrogels, allow for even longer wear periods of up to 30 consecutive nights; these longer-wear lenses are often referred to as "continuous wear" (CW). EW and CW contact lenses can be worn overnight because of their high oxygen permeability. While awake, the eyes are mostly open, allowing oxygen from the air to dissolve into the tears and pass through the lens to the cornea. While asleep, oxygen is supplied from the blood vessels in the back of the eyelid. A lens hindering passage of oxygen to the cornea causes corneal hypoxia which can result in serious complications, such as corneal ulcer that, if left untreated, can permanently decrease vision. EW and CW contact lenses typically allow for a transfer of 5–6 times more oxygen than conventional softs, allowing the cornea to remain healthy, even with closed eyelids.
Wearing lenses designed for daily wear overnight has an increased risk for corneal infections, corneal ulcers and corneal neovascularization—this latter condition, once it sets in, cannot be reversed and will eventually spoil vision acuity through diminishing corneal transparency. The most common complication of extended wear is giant papillary conjunctivitis (GPC), sometimes associated with a poorly fitting contact lens.
Replacement schedule
[edit]Contact lenses are often categorized by their replacement schedule. Single use lenses (called 1-day or daily disposables) are discarded after one use. Because they do not have to stand up to the wear and tear of repeated uses, these lenses can be made thinner and lighter, greatly improving their comfort. Lenses replaced frequently gather fewer deposits of allergens and germs, making these lenses preferable for patients with ocular allergies or for those who are prone to infection. Single-use lenses are also useful for people who wear contact lenses infrequently, or when losing a lens is likely or not easily replaced (such as when on vacation). They are also considered useful for children because cleaning or disinfecting is not needed, leading to improved compliance.
Other disposable contact lenses are designed for replacement every two or four weeks. Quarterly or annual lenses, which used to be very common, are now much less so. Rigid gas permeable lenses are very durable and may last for several years without the need for replacement. PMMA hards were very durable and were commonly worn for 5 to 10 years but had several drawbacks.
Lenses with different replacement schedules can be made of the same material. Although the materials are alike, differences in the manufacturing processes determine if the resulting lens will be a "daily disposable" or one recommended for two- or four-week replacement. However, sometimes manufacturers use absolutely identical lenses and just repackage them with different labels.[68][69]
Manufacturing
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/06/Siliconehydrogel.svg/220px-Siliconehydrogel.svg.png)
Typically, soft contact lenses are mass-produced, while rigids are custom-made to exact specifications for the individual patient.
- Spin-cast lenses – A soft lens manufactured by whirling liquid silicone in a revolving mold at high speed.[71]
- Diamond turning – This type is cut and polished on a CNC lathe.[71] The lens starts out as a cylindrical disk held in the jaws of the lathe that is equipped with an industrial-grade diamond as the cutting tool. The CNC lathe may turn at nearly 6000 RPM as the cutter removes the desired amount of material from the inside of the lens. The concave (inner) surface of the lens is then polished with some fine abrasive paste, oil, and a small polyester cotton ball turned at high speeds. To hold the delicate lens in reverse manner, wax is used as an adhesive. The lens' convex (outer) surface is thus cut and polished by the same process. This method can be used to shape rigid as well as soft lenses. In the case of softs, the lens is cut from a dehydrated polymer that is rigid until water is reintroduced.
- Molded – Molding is used to manufacture some brands of soft contact lenses. Rotating molds are used and the molten material is added and shaped by centripetal forces. Injection molding and computer control are also used to create nearly perfect lenses.[72] The lens is kept moist throughout the entire molding process and is never dried and rehydrated.
Many companies make contact lenses. In the United States, there are five major manufacturers:[73]
- Johnson & Johnson; maker of Acuvue lenses
- The Cooper Companies: through its CooperVision
- Alcon
- Bausch Health: through its Bausch & Lomb subsidiary
- X-Cel Specialty Contacts; maker of Westcon lenses.
Prescriptions
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e5/Lens_Basecurve.jpg/220px-Lens_Basecurve.jpg)
The parameters specified in a contact lens prescription may include:
- Material / Brand name
- Base curve radius (BC, BCR)
- Diameter (D, OAD)
- Power in diopters
- Center thickness (CT)
Prescriptions for contact lenses and glasses may be similar but are not interchangeable. Prescribing of contact lenses is usually restricted to various combinations of ophthalmologists, optometrists and opticians. An eye examination is needed to determine an individual's suitability for contact lens wear. This typically includes a refraction to determine the proper power of the lens and an assessment of the health of the eye's anterior segment. Many eye diseases inhibit contact lens wear, such as active infections, allergies, and dry eye.[74] Keratometry is especially important in the fitting of rigid lenses.
United States
[edit]Contact lenses are prescribed by ophthalmologists, optometrists, or specially licensed opticians under the supervision of an eye doctor. They are typically ordered at the same office that conducts the eye exam and fitting. But the Fairness to Contact Lens Consumers Act[75] guarantees consumers a copy of their contact lens prescription, allowing them to obtain lenses at the provider of their choice.
Usage
[edit]Before touching the contact lens or the eye, it is important to wash hands thoroughly with soap and rinse well. Soaps containing moisturizers or allergens should be avoided as these can cause eye irritation.[76] Drying of hands using towels or tissues before handling contact lenses can transfer lint (fluff) to the hands and, subsequently, to the lenses, causing irritation upon insertion. Towels, unless freshly laundered on high temperature wash, are frequently contaminated with large quantities of bacteria and, as such, should be avoided when handling lenses. Dust, lint and other debris may collect on the outside of contact lenses. Again, hand contact with this material, before handling contact lenses, may transfer it to the lenses themselves. Rinsing the case under a source of clean running water, before opening it, can help alleviate this problem. Next the lens should be removed from its case and inspected for defects (e.g. splits, folds, lint). A 'gritty' or rough appearance to the lens surface may indicate that a considerable quantity of proteins, lipids and debris has built up on it and that additional cleaning is required; this is often accompanied and felt by unusually high irritation upon insertion.
Care should be taken to ensure the soft lens is not inserted inside-out. The edge of a lens turned inside out has a different appearance, especially when the lens is slightly folded. Insertion of an inside-out lens for a brief time (less than one minute) should not cause any damage to the eye. Some brands of lenses have markings on the rim that make it easier to tell the front of the lens apart from the back.
Insertion
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/32/Contact_Lens_Ayala.jpg/200px-Contact_Lens_Ayala.jpg)
Contact lenses are typically inserted into the eye by placing them on the pad of the index or middle finger with the concave side upward and then using that finger to place the lens on the eye. Rigid lenses should be placed directly on the cornea. Soft lenses may be placed on the sclera (white of the eye) and then slid into place. Another finger of the same hand, or a finger of the other hand, is used to keep the eye wide open. Alternatively, the user may close their eyes and then look towards their nose, sliding the lens into place over the cornea. Problems may arise if the lens folds, turns inside-out, slides off the finger prematurely, or adheres more tightly to the finger than the eye surface. A drop of solution may help the lens adhere to the eye.
When the lens first contacts the eye, it should be comfortable. A brief period of irritation may occur, caused by a difference in pH and/or salinity between that of the lens solution and the tear.[77][78] This discomfort fades quickly as the solution drains away and is replaced by the natural tears. However, if irritation persists, the cause could be a dirty, damaged, or inside-out lens. Removing and inspecting it for damage and proper orientation, and re-cleaning if necessary, should correct the problem. If discomfort continues, the lens should not be worn. In some cases, taking a break from lens wear for a day may correct the problem. In case of severe discomfort, or if it does not resolve by the next day, the person should be seen as soon as possible by an eye doctor to rule out potentially serious complications.
Removal
[edit]Removing contact lenses incorrectly can result in damage to the lens and injury to the eye, so certain precautions must be taken. Rigid contact lenses can best be removed by pulling the eyelid tight and then blinking, whereupon the lens drops out. With one finger on the outer corner of the eyelids, or lateral canthus, the person stretches the eyelids towards the ear; the increased tension of the eyelid margins against the edge of lens allows the blink to break the capillary action that adheres the lens to the eye. The other hand is typically cupped underneath the eye to catch the lens as it drops out. For soft lenses, which have a stronger adherence to the eye surface, this technique is less suitable.
A soft contact lens may be removed by pinching the edge between the thumb and index finger. Moving the lens off the cornea first can improve comfort during removal and reduce risk of scratching the cornea with a fingernail. It is also possible to push or pull a soft lens far enough to the side or bottom of the eyeball to get it to fold then fall out, without pinching and thereby damaging it. If these techniques are used with a rigid lens, it may scratch the cornea.
There are also small tools specifically for removing lenses. Usually made of flexible plastic, they resemble small tweezers, or plungers that suction onto the front of the lens. Typically, these tools are used only with rigid lenses. Extreme care must be exercised when using mechanical tools or fingernails to insert or remove contact lenses.
Care
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/6a/Lens-cover.jpg/220px-Lens-cover.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a3/Contact_lens_case_for_Hydrogen_Peroxide_solution_showing_bubbles.jpg/220px-Contact_lens_case_for_Hydrogen_Peroxide_solution_showing_bubbles.jpg)
Lens care varies depending on material and wear schedule. Daily disposables are discarded after a single use and thus require no cleaning. Other lenses need regular cleaning and disinfecting to prevent surface coating and infections.
There are many ways to clean and care for contact lenses, typically called care systems or lens solutions:
- Multipurpose solutions
- The main attraction of multipurpose solutions is that the same solution can clean, rinse, disinfect and store lenses. Some multipurpose solutions also contain ingredients that improve the surface wettability and comfort of silicone hydrogel lenses. Studies showed that multipurpose solutions are ineffective against Acanthamoebae.[79][80][81] There is preliminary research on creating a new multipurpose solution that kills amoeba.[82]
- Hydrogen peroxide contact solutions
- Hydrogen peroxide can be used to disinfect contact lenses.[83] Care should be taken not to get hydrogen peroxide in the eye because it is very painful and irritating. With "two-step" products, the hydrogen peroxide must be rinsed away with saline before the lenses may be worn. "One-step" systems allow the hydrogen peroxide to react completely, becoming pure water. Thus "one-step" hydrogen peroxide systems do not require the lenses to be rinsed before insertion, provided the solution has been given enough time to react.
- An exposure time of 2-3 hours to 3% H
2O
2 (non neutralized solution) is sufficient to kill bacteria, HIV, fungi, and Acanthamoeba.[84][85] This can be achieved by using a "two-step" product or a "one-step" tablet system if the catalytic tablet is not added before 2-3 hours.[85] However, the "one-step" catalytic disk systems are not effective against Acanthamoeba due to insufficient exposure time.[85] - Enzymatic cleaner
- Used for cleaning protein deposits off lenses, usually weekly, if the daily cleaner is not sufficient. Typically, this cleaner is in tablet form.
- Ultraviolet, vibration, or ultrasonic devices
- These devices intend to disinfect and clean contact lenses. The lenses are inserted inside the portable device (running on batteries and/or plug-in) for 2 to 6 minutes during which both the microorganisms and protein build-up are supposed to be cleaned. However these devices can not be used to replace the manual rub and rinse method because vibration and ultrasound can not create relative motion between contact lens and solution, which is required for proper cleaning of the lens.[86] These devices are not usually available in optic retailers but are in other stores.[87][88][89]
Rub and rinse method
[edit]Contact lenses can be mechanically cleaned of more substantial protein, lipid and debris build up by rubbing them between the clean pad of a finger and the palm of a hand, using a small amount of cleaning fluid as a lubricant; and by rinsing thereafter. This "rub and rinse" method is thought to be the most effective method for multipurpose solutions,[90] and is the method indicated by the American Academy of Ophthalmology regardless of cleaning solution used.[91] In 2010, the FDA recommended that manufacturers removed the "no rub" from product labeling,[92] "because 'rub-and-rinse' regimens help prevent microbial adhesion to the contact lens, help prevent formation of biofilms, and generally reduce the microbial load on the lens and the lens case."[93]
Physical rubbing devices
[edit]This type of devices mimic digital rubbing. The lenses are sandwiched by silicone parts inside the portable device. The device applies a gentle yet high speed rubbing action on the lens surface and remove debris.
- Saline solution
- Sterile saline is used for rinsing the lens after cleaning and preparing it for insertion. Saline solutions do not disinfect, so it must be used in conjunction with some type of disinfection system. One advantage to saline is that it cannot cause an allergic response, so it is well suited for individuals with sensitive eyes or strong allergies.
- Daily cleaner
- Used to clean lenses on a daily basis. A few drops of cleaner are applied to the lens while it rests in the palm of the hand; the lens is rubbed for about 20 seconds with a clean fingertip (depending on the product) on each side. Lens must then be rinsed. This system is commonly used to care for rigid lenses.
Water is not recommended for cleaning contact lenses.[94] Insufficiently chlorinated tap water can lead to lens contamination, particularly by Acanthamoeba. On the other hand, sterile water will not kill any contaminants that get in from the environment.[95]
Some products must be used only with certain types of contact lenses.
Aside from cleaning the contact lenses, contact lens case should also be kept clean and be replaced at minimum every 3 months.[91]
Contact lens solutions often contain preservatives such as benzalkonium chloride and benzyl alcohol. Preservative-free products usually have shorter shelf lives, but are better suited for individuals with an allergy or sensitivity to a preservative. In the past, thiomersal was used as a preservative. In 1989, thiomersal was responsible for about 10% of problems related to contact lenses.[96] As a result, most products no longer contain thiomersal.
Complications
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0d/Clare-314.jpg/220px-Clare-314.jpg)
Contact lenses are generally safe as long as they are used correctly. Complications from contact lens wear affect roughly 5% of wearers yearly.[97] Factors leading to eye damage varies,[98] and improper use of a contact lens may affect the eyelid, the conjunctiva, and, most of all, the whole structure of the cornea.[97] Poor lens care can lead to infections by various microorganisms including bacteria, fungi, and Acanthamoeba (Acanthamoeba keratitis).
Many complications arise when contact lenses are worn not as prescribed (improper wear schedule or lens replacement). Sleeping in lenses not designed or approved for extended wear is a common cause of complications. Many people go too long before replacing their contacts, wearing lenses designed for 1, 14, or 30 days of wear for multiple months or years. While this does save on the cost of lenses, it risks permanent damage to the eye and even loss of sight.
For non Silicone-Hydrogel lenses, one of the major factors that causes complications is that the contact lens is an oxygen barrier. The cornea needs a constant supply of oxygen to remain completely transparent and function as it should; it normally gets that oxygen from the surrounding air while awake, and from the blood vessels in the back of the eyelid while asleep. The most prominent risks associated with long-term, chronic low oxygen to the cornea include corneal neovascularization, increased epithelial permeability, bacterial adherence, microcysts, corneal edema, endothelial polymegethism, dry eye and potential increase in myopia.[99] Much of the research into soft and rigid contact lens materials has centered on improving oxygen transmission through the lens.
Silicone-Hydrogel lenses available today have effectively eliminated hypoxia for most patients.[100]
Mishandling of contact lenses can also cause problems. Corneal abrasions can increase the chances of infection.[101] When combined with improper cleaning and disinfection of the lens, a risk of infection further increases. Decreased corneal sensitivity after extended contact lens wear may cause a patient to miss some of the earliest symptoms of such complications.[102]
The way contact lenses interact with the natural tear layer is a major factor in determining lens comfort and visual clarity. People with dry eyes are particularly vulnerable to discomfort and episodes of brief blurry vision. Proper lens selection can minimize these effects.
Long-term wear (over five years) of contact lenses may "decrease the entire corneal thickness and increase the corneal curvature and surface irregularity."[103] Long-term wear of rigid contacts is associated with decreased corneal keratocyte density[104] and increased number of epithelial Langerhans cells.[105]
All contact lenses sold in the United States are studied and approved as safe by the FDA when specific handling and care procedures, wear schedules, and replacement schedules are followed.
Current research
[edit]Contact lens sensors to monitor the ocular temperature have been demonstrated.[106] Monitoring intraocular pressure with contact lens sensors is another area of contact lens research.[107]
A large segment of current contact lens research is directed towards the treatment and prevention of conditions resulting from contact lens contamination and colonization by foreign organisms. Clinicians tend to agree that the most significant complication of contact lens wear is microbial keratitis and that the most predominant microbial pathogen is Pseudomonas aeruginosa.[108] Other organisms are also major causative factors in bacterial keratitis associated with contact lens wear, although their prevalence varies across different locations. These include both the Staphylococcus species (aureus and epidermidis) and the Streptococcus species, among others.[109][110] Microbial keratitis is a serious focal point of current research due to its potentially devastating effect on the eye, including severe vision loss.[111]
One specific research topic of interest is how microbes such as Pseudomonas aeruginosa invade the eye and cause infection. Although the pathogenesis of microbial keratitis is not well understood, many different factors have been investigated. One group of researchers showed that corneal hypoxia exacerbated Pseudomonas binding to the corneal epithelium, internalization of the microbes, and induction of the inflammatory response.[112] One way to alleviate hypoxia is to increase the amount of oxygen transmitted to the cornea. Although silicone-hydrogel lenses almost eliminate hypoxia in patients due to their very high levels of oxygen transmissibility,[113] they also seem to provide a more efficient platform for bacterial contamination and corneal infiltration than other conventional hydrogel soft contact lenses. One study showed that Pseudomonas aeruginosa and Staphylococcus epidermis adhere much more strongly to unworn silicone hydrogel contact lenses than conventional hydrogel lenses and that adhesion of Pseudomonas aeruginosa was 20 times stronger than that of Staphylococcus epidermidis.[114] This might partly explain why Pseudomonas infections are the most predominant. However, another study conducted with worn and unworn silicone and conventional hydrogel contact lenses showed that worn silicone contact lenses were less prone to Staphylococcus epidermidis colonization than conventional hydrogel lenses.[115]
Besides bacterial adhesion and cleaning, micro and nano pollutants (biological and manmade) is an area of contact lens research that is growing. Small physical pollutants ranging from nanoplastics to fungi spores to plant pollen adhere to contact lens surfaces in high concentrations. It has been found that multipurpose solution and rubbing with fingers does not significantly clean the lenses. A group of researchers have suggested an alternative cleaning solution, PoPPR (polymer on polymer pollution removal).[116] This cleaning technique takes advantage of a soft and porous polymer to physically peel pollutants off of contact lenses.
Another important area of contact lens research deals with patient compliance. Compliance is a major issue[117] pertaining to the use of contact lenses because patient noncompliance often leads to contamination of the lens, storage case, or both.[118][119][120] However, careful users can extend the wear of lenses through proper handling: there is, unfortunately, no disinterested research on the issue of "compliance" or the length of time a user can safely wear a lens beyond its stated use. The introduction of multipurpose solutions and daily disposable lenses have helped to alleviate some of the problems observed from inadequate cleaning but new methods of combating microbial contamination are currently being developed. A silver-impregnated lens case has been developed which helps to eradicate any potentially contaminating microbes that come in contact with the lens case.[121] Additionally, a number of antimicrobial agents are being developed that have been embedded into contact lenses themselves. Lenses with covalently attached selenium molecules have been shown to reduce bacterial colonization without adversely affecting the cornea of a rabbit eye[122] and octyl glucoside used as a lens surfactant significantly decreases bacterial adhesion.[123] These compounds are of particular interest to contact lens manufacturers and prescribing optometrists because they do not require any patient compliance to effectively attenuate the effects of bacterial colonization.
One area of research is in the field of bionic lenses. These are visual displays that include built-in electric circuits and light-emitting diodes and can harvest radio waves for their electric power. Bionic lenses can display information beamed from a mobile device overcoming the small display size problem. The technology involves embedding nano and microscale electronic devices in lenses. These lenses will also need to have an array of microlenses to focus the image so that it appears suspended in front of the wearer's eyes. The lens could also serve as a head-up display for pilots or gamers.[124]
Drug administration through contact lenses is also becoming an area of research. One application is a lens that releases anesthesia to the eye for post-surgery pain relief, especially after PRK (photorefractive keratectomy) in which the healing process takes several days. One experiment shows that silicone contact lenses that contain vitamin E deliver pain medication for up to seven days compared with less than two hours in usual lenses.[124]
Another study of the usage of contact lens is aimed to address the issue of macular degeneration (AMD or age-related macular degeneration). An international collaboration of researchers was able to develop a contact lens that can shift between magnified and normal vision. Previous solutions to AMD included bulky glasses or surgical implants. But the development of this new contact lens, which is made of polymethyl methacrylate, could offer an unobtrusive solution.[125]
In popular culture
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/25/Dracula_1958_c.jpg/275px-Dracula_1958_c.jpg)
Films
[edit]One of the earliest known motion pictures to introduce the use of contact lenses as a make-up artist's device for enhancing the eyes was by the innovative actor Lon Chaney in the 1926 film The Road to Mandalay to create the effect of a character who had a blind eye.[126] Dr. Rueben Greenspoon applied them to Orson Welles for the film Citizen Kane in 1940. In the 1950s, contact lenses were starting to be used in British color horror films. An early example of this is the British actor Christopher Lee as the Dracula character in the 1958 color horror film Dracula, which helped to emphasize his horrific looking black pupils and red bloodshot eyes. Tony Curtis wore them in the 1968 film The Boston Strangler. Contact lenses were also used to better emphasize the sinister gaze of the demonic characters in 1968's Rosemary's Baby and 1973's The Exorcist. Colored custom-made contact lenses are now standard makeup for a number of special effects-based movies.[127]
Further reading
[edit]- Demas GN (1989). "pH consistency and stability of contact lens solutions". J Am Optom Assoc. 60 (10): 732–4. PMID 2584587.
The pH of contact lens solutions has been implicated in the comfort of contact lenses on insertion.
- "Eye Care". CLH. Retrieved 20 November 2014.
- "How to Put Contacts in Your Eyes". CooperVision. Retrieved 20 November 2014.
use plain soap without any heavy moisturizers or perfumes. Rinse well and dry your hands. Again, this is to prevent transmitting anything unwanted to your eyes.
See also
[edit]References
[edit]- ^ R Moreddu; D Vigolo; AK Yetisen (2019). "Contact Lens Technology: From fundamentals to Applications" (PDF). Advanced Healthcare Materials. 8 (15): 1900368. doi:10.1002/adhm.201900368. PMID 31183972. S2CID 184488183.
- ^ NM Farandos; AK Yetisen; MJ Monteiro; CR Lowe; SH Yun (2014). "Contact Lens Sensors in Ocular Diagnostics". Advanced Healthcare Materials. 4 (6): 792–810. doi:10.1002/adhm.201400504. PMID 25400274. S2CID 35508652.
- ^ a b Nichols, Jason J., et al "ANNUAL REPORT: Contact Lenses 2010". January 2011.
- ^ Morgan, Philip B., et al. "International Contact Lens Prescribing in 2010". Contact Lens Spectrum. October 2011.
- ^ Agarwal, R. K. (1969), Contact Lens Notes, Some factors concerning patients' motivation, The Optician, 10 January, pages 32-33 (published in London, England).
- ^ Sokol, JL; Mier, MG; Bloom, S; Asbell, PA (1990). "A study of patient compliance in a contact lens-wearing population". CLAO Journal. 16 (3): 209–13. PMID 2379308.
- ^ "Compare Contacts & Glasses". ACUVUE® Middle East. Retrieved 22 November 2021.
- ^ "Contact Lenses for Keratoconus". National Keratoconus Foundation. 21 February 2018.
- ^ a b Heitz, RF and Enoch, J. M. (1987) "Leonardo da Vinci: An assessment on his discourses on image formation in the eye." Advances in Diagnostic Visual Optics 19—26, Springer-Verlag.
- ^ a b Leonard G. Schifrin; William J. Rich (December 1984). The Contact Lens Industry: Structure, Competition, and Public Policy. United States Office of Technology Assessment.
- ^ a b Moreddu, Rosalia; Vigolo, Daniele; Yetisen, Ali K. (August 2019). "Contact Lens Technology: From Fundamentals to Applications" (PDF). Advanced Healthcare Materials. 8 (15): 1900368. doi:10.1002/adhm.201900368. PMID 31183972. S2CID 184488183.
- ^ Rajesh Sinha; Vijay Kumar Dada (31 January 2017). Textbook of Contact Lenses. JP Medical Ltd. pp. 2–. ISBN 978-93-86150-44-8.
- ^ "The History of Contact Lenses." Archived 11 October 2008 at the Wayback Machine eyeTopics.com. Accessed 18 October 2006.
- ^ "History of Contact Lenses and Improved Technology". Master Eye Associates. Retrieved 14 September 2019.
- ^ "Contact Lenses". Van Nostrand's Scientific Encyclopedia. 2005. doi:10.1002/0471743984.vse2040. ISBN 0471743984.
- ^ Hellemans, Alexander; Bunch, Bryan (1988). The Timetables of Science. Simon & Schuster. p. 367. ISBN 0671621300.
- ^ "Adolf Eugen Fick (1852–1937)". Archived from the original on 17 May 2015. Retrieved 26 March 2015.
- ^ Heitz, R (September 2014). "The invention of the contact lenses (1888)". Acta Ophthalmologica. 92 (s253): 0. doi:10.1111/j.1755-3768.2014.3773.x. ISSN 1755-375X.
- ^ Sinha, Rajesh; Dada, Vijay Kumar (2017). Textbook of contact lenses (Fifth ed.). New Delhi ; Philadelphia: Jaypee Brothers Medical Publishers (P) Ltd. ISBN 978-93-86150-44-8. OCLC 962009998.
- ^ Pearson, Richard M.; Efron, Nathan (September 1989). "Hundredth anniversary of August Müller's inaugural dissertation on contact lenses". Survey of Ophthalmology. 34 (2): 133–141. doi:10.1016/0039-6257(89)90041-6. PMID 2686057.
- ^ Robert B. Mandell. Contact Lens Practice, 4th Edition. Charles C. Thomas, Springfield, IL, 1988
- ^ "Contact Lens for Eyes Now Common; It is Used as Substitute for Spectacles." Nashua (IA) Reporter, 28 April 1937.
- ^ Gyorgy, Salacz (January 2001). "Dr István Györffy, 1912–1999". Contact Lens and Anterior Eye. 24 (4): 180–182. doi:10.1016/S1367-0484(01)80040-0.
- ^ Contact Lens History: How Contact Lenses Have Developed Through the Years. EyeHealth Central. Retrieved from https://www.contactlenses.co.uk/education/history.htm
- ^ U.S. Patent No. 2,510,438, filed 28 February 1948.
- ^ "The Corneal Lens", The Optician, 2 September 1949, pp. 141–144.
- ^ "Corneal Contact Lenses", The Optician, 9 September 1949, p. 185.
- ^ "New Contact Lens Fits Pupil Only", The New York Times, 11 February 1952, p. 27.
- ^ Pal, Subrata (2014), "The Eye and Its Artificial Replacement", Design of Artificial Human Joints & Organs, Boston, MA: Springer US, pp. 219–249, doi:10.1007/978-1-4614-6255-2_14, ISBN 978-1-4614-6254-5, retrieved 29 August 2024
- ^ Rosenthal, J. William (1996). Spectacles and Other Vision Aids: A History and Guide to Collecting. Norman Publishing. p. 379. ISBN 978-0930405717.
- ^ Smith, William D. (18 April 1971). "Soft-Lens Clamor". The New York Times. Retrieved 29 November 2018.
- ^ "nytimes archive". The New York Times. 6 December 1964. Retrieved 24 August 2018.
- ^ Pearce, Jeremy (23 September 2007). "Norman Gaylord, 84; helped develop type of contact lens". (New York Times News Service). The Boston Globe. Retrieved 6 October 2007.
- ^ Wichterle O, Lim D (1960). "Hydrophilic gels for biological use". Nature. 185 (4706): 117–118. Bibcode:1960Natur.185..117W. doi:10.1038/185117a0. S2CID 4211987.
- ^ "CONTACT LENS HISTORY – Otto Wichterle". Archived from the original on 29 January 2015. Retrieved 26 March 2015.
- ^ Agarwal Rishi K (1972). "Some Thoughts on Soft Lenses". The Contact Lens. 4 (1): 28.
- ^ "Editorial note". American Journal of Optometry and Physiological Optics. 65 (9): 744. 1988.
- ^ a b c Szczotka-Flynn, Loretta (1 May 2008). "Looking at Silicone Hydrogels Across Generations". www.optometricmanagement.com. Archived from the original on 19 July 2011. Retrieved 5 October 2021.
- ^ "Astigmatism". www.aoa.org. Retrieved 6 August 2020.[permanent dead link]
- ^ "Advantages and Disadvantages of Various Types of Contact Lenses". www.aoa.org. Retrieved 6 August 2020.
- ^ "A Complete Guide to Gas Permeable Contact Lenses". EyeHealthWeb.com. 26 January 2013. Retrieved 6 August 2020.
- ^ Lebow, KA; Goldberg, JB (1975). "Characteristic of binocular vision found for presbyopic patients wearing single vision contact lenses". Journal of the American Optometric Association. 46 (11): 1116–23. PMID 802938.
- ^ Pollard, Zane F.; Greenberg, Marc F.; Bordenca, Mark; Elliott, Joshua; Hsu, Victoria (September 2011). "Strabismus Precipitated by Monovision". American Journal of Ophthalmology. 152 (3): 479–482.e1. doi:10.1016/j.ajo.2011.02.008. PMID 21669405.
- ^ Wood, Joanne M.; Wick, Kristan; Shuley, Vicki; Pearce, Brendon; Evans, Dean (6 May 1998). "The effect of monovision contact lens wear on driving performance". Clinical and Experimental Optometry. 81 (3): 100–103. doi:10.1111/j.1444-0938.1998.tb06727.x. PMID 12482258. S2CID 38392636.
- ^ Hartenbaum, NP; Stack, CM (1997). "Color vision deficiency and the X-Chrom lens". Occupational Health & Safety. 66 (9): 36–40, 42. PMID 9314196.
- ^ Siegel, IM (1981). "The X-Chrom lens. On seeing red". Survey of Ophthalmology. 25 (5): 312–24. doi:10.1016/S0039-6257(81)80001-X. PMID 6971497.
- ^ http://www.achromatopsia.info/red-contact-lenses/ Red contact lenses for achromats
- ^ Swarbrick, HA; Nguyen, P; Nguyen, T; Pham, P (2001). "The ChromaGen contact lens system: Colour vision test results and subjective responses". Ophthalmic & Physiological Optics. 21 (3): 182–96. doi:10.1046/j.1475-1313.2001.00583.x. PMID 11396392. S2CID 40409461.
- ^ Harris D "Colouring Sight: A study of CL fittings with colour enhancing lenses" 'Optician' 8 June 1997
- ^ Harris DA, MacRow-Hill SJ "Application of ChromaGen haploscopic lenses to patients with dyslexia: a double masked placebo controlled trial" Journal of the American Optometric Association 25/10/99.
- ^ "Cision - FDA Cleared ChromaGen Lenses" (Press release). Archived from the original on 3 July 2013.
- ^ "Telescopic contact lens magnifies vision by 2.8 times on demand". Wired UK. Archived from the original on 2 April 2015. Retrieved 26 March 2015.
- ^ Morgan PB et al."International Contact Lens Prescribing in 2004: An analysis of more than 17,000 contact lens fits from 14 countries in 2004 reveals the diversity of contact lens practice worldwide." Contact Lens Spectrum. January 2005.
- ^ Vanderbilt University Medical Center – Vanderbilt Eye Doctors Warn of the Dangers of Cosmetic Contact Lenses. Mc.vanderbilt.edu (19 April 2010). Retrieved on 2013-07-21.
- ^ "How Do You Find the Right Circle Lens?". EyeCandy's. Archived from the original on 13 December 2013. Retrieved 26 March 2015.
- ^ Caceres, Vanessa (June 2009). "Taking a second look at scleral lenses". ASCRS EyeWorld. Archived from the original on 28 February 2019. Retrieved 18 May 2014.
- ^ Alvarez-Lorenzo, Carmen; Anguiano-Igea, Soledad; Varela-García, Angela; Vivero-Lopez, María; Concheiro, Angel (January 2019). "Bioinspired hydrogels for drug-eluting contact lenses". Acta Biomaterialia. 84: 49–62. doi:10.1016/j.actbio.2018.11.020. PMID 30448434. S2CID 53780024.
- ^ Zidan, Ghada; Rupenthal, Ilva D.; Greene, Carol; Seyfoddin, Ali (2018). "Medicated ocular bandages and corneal health: potential excipients and active pharmaceutical ingredients". Pharmaceutical Development and Technology. 23 (3): 255–260. doi:10.1080/10837450.2017.1377232. PMID 28875742. S2CID 32765975.
- ^ "Eye Health Guide – Eye Diseases, Eye Problems and Eye Conditions". All About Vision. Archived from the original on 9 April 2008. Retrieved 26 March 2015.
- ^ "45 COVERAGE ISSUES – SUPPLIES – DRUGS 11–91 45" (PDF). Centers for Medicare and Medicaid Services. Archived from the original (PDF) on 4 March 2006. Retrieved 1 March 2006.
- ^ "Qmed is the world's only directory of pre-qualified suppliers to the medical device and in vitro diagnostics industry. - Qmed". Archived from the original on 5 December 2008. Retrieved 26 March 2015.
- ^ "Rigid contact lenses". Eagle Eyes UK. Retrieved 28 April 2022.
- ^ FDA Premarket Notification for "new silicone hydrogel lens for daily wear" Archived 3 October 2008 at the Wayback Machine 'July 2008.
- ^ Haworth, Kristina; Travis, Darian; Leslie, Louis; Fuller, Daniel; Pucker, Andrew D (19 September 2023). Cochrane Eyes and Vision Group (ed.). "Silicone hydrogel versus hydrogel soft contact lenses for differences in patient-reported eye comfort and safety". Cochrane Database of Systematic Reviews. 2023 (9): CD014791. doi:10.1002/14651858.CD014791.pub2. PMC 10507745. PMID 37724689.
- ^ Chou, Brian (1 June 2008). "The Evolution of Silicone Hydrogel Lenses". www.clspectrum.com. Archived from the original on 30 December 2016. Retrieved 5 October 2021.
- ^ White, Neal; Jennings, Christopher; Pelka, Kevin (16 January 2015). "Hybrid contact lens". Retrieved 28 February 2018.
- ^ "Contact Lens Types". American Academy of Ophthalmology. Retrieved 30 April 2020.
- ^ "The Only Difference Is When You Throw Them Away". Bloomberg.com. 12 July 1993. Retrieved 26 December 2016.
- ^ "Contact Lenses – Types of Contact Lenses. Disposable (Replacement Schedule) Contact Lenses". www.fda.gov. Retrieved 26 December 2016.
- ^ John Wiley & Sons, Inc, ed. (2000). Kirk-Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961. ISBN 9780471484943.
- ^ a b Cassin, B. and Solomon, S. Dictionary of Eye Terminology. Gainesville, Florida: Triad Publishing Company, 1990.
- ^ Manufacture of soft contact lenses. "Manufacture of soft contact lenses".
- ^ Federal Trade Commission. "The Strength of Competition in the Sale of Rx Contact Lenses: An FTC Study". February 2005.
- ^ Agarwal, R.K. (1970), Some reasons for not fitting contact lenses, The Optician, 4 December, page 623 (published in London, England).
- ^ "Fairness to Contact Lens Consumers Act". 15 October 2003.
- ^ "How to Put Contacts in Your Eyes". CooperVision. Retrieved 20 November 2014.
use plain soap without any heavy moisturizers or perfumes. Rinse well and dry your hands. Again, this is to prevent transmitting anything unwanted to your eyes.
- ^ Demas GN (1989). "pH consistency and stability of contact lens solutions". J Am Optom Assoc. 60 (10): 732–4. PMID 2584587.
The pH of contact lens solutions has been implicated in the comfort of contact lenses on insertion.
- ^ "Eye Care". CLH. Retrieved 20 November 2014.
- ^ Johnston, Stephanie P.; Sriram, Rama; Qvarnstrom, Yvonne; Roy, Sharon; Verani, Jennifer; Yoder, Jonathan; Lorick, Suchita; Roberts, Jacquelin; Beach, Michael J.; Visvesvara, Govinda (July 2009). "Resistance of Acanthamoeba Cysts to Disinfection in Multiple Contact Lens Solutions". Journal of Clinical Microbiology. 47 (7): 2040–2045. doi:10.1128/JCM.00575-09. PMC 2708465. PMID 19403771.
- ^ Padzik, Marcin; Chomicz, Lidia; Szaflik, Jacek P.; Chruścikowska, Agnieszka; Perkowski, Konrad; Szaflik, Jerzy (November 2014). "In vitro effects of selected contact lens care solutions on Acanthamoeba castellanii strains in Poland". Experimental Parasitology. 145: S98–S101. doi:10.1016/j.exppara.2014.06.014. PMID 24967738.
- ^ Aguiar, Ana; Oliveira Silveira, Caroline; Todero Winck, Mari; Rott, Marilise (1 January 2013). "Susceptibility of Acanthamoeba to multipurpose lens-cleaning solutions". Acta Parasitologica. 58 (3): 304–308. doi:10.2478/s11686-013-0143-9. hdl:10183/179379. PMID 23990426.
- ^ Fears, Alyssa C.; Metzinger, Rebecca C.; Killeen, Stephanie Z.; Reimers, Robert S.; Roy, Chad J. (December 2018). "Comparative in vitro effectiveness of a novel contact lens multipurpose solution on Acanthamoeba castellanii". Journal of Ophthalmic Inflammation and Infection. 8 (1): 19. doi:10.1186/s12348-018-0161-8. PMC 6200833. PMID 30357549.
- ^ Hughes, Reanne; Kilvington, Simon (July 2001). "Comparison of Hydrogen Peroxide Contact Lens Disinfection Systems and Solutions against Acanthamoeba polyphaga". Antimicrobial Agents and Chemotherapy. 45 (7): 2038–43. doi:10.1128/AAC.45.7.2038-2043.2001. PMC 90597. PMID 11408220.
- ^ Hiti, K; Walochnik, J; Haller-Schober, EM; Faschinger, C; Aspöck, H (1 February 2002). "Viability of Acanthamoeba after exposure to a multipurpose disinfecting contact lens solution and two hydrogen peroxide systems". British Journal of Ophthalmology. 86 (2): 144–146. doi:10.1136/bjo.86.2.144. PMC 1771011. PMID 11815336.
- ^ a b c Hiti, K; Walochnik, J; Faschinger, C; Haller-Schober, E-M; Aspöck, H (December 2005). "One- and two-step hydrogen peroxide contact lens disinfection solutions against Acanthamoeba: How effective are they?". Eye. 19 (12): 1301–1305. doi:10.1038/sj.eye.6701752. PMID 15543174.
- ^ Efron, Nathan; Lowe, Russell; Vallas, Vicky; Grusiner, Eugene (1 January 1991). "Clinical efficacy of standing wave and ultrasound for cleaning and disinfecting contact lenses". International Contact Lens Clinic. 18 (1): 24–29. doi:10.1016/0892-8967(91)90040-7. ISSN 0892-8967.
- ^ "How Optical Ultrasonic Cleaners Work". The Tech-FAQ. 6 April 2019.
- ^ White, Gina. "Caring for Soft Contact Lenses". All About Vision.
- ^ Ward, Michael. "Soft Contact Lens Care Products". Contact Lens Spectrum.
- ^ Zhu, Hua; Bandara, Mahesh B.; Vijay, Ajay K.; Masoudi, Simin; Wu, Duojia; Willcox, Mark D. P. (August 2011). "Importance of Rub and Rinse in Use of Multipurpose Contact Lens Solution". Optometry and Vision Science. 88 (8): 967–972. doi:10.1097/OPX.0b013e31821bf976. PMID 21623253. S2CID 23544740.
- ^ a b Boyd, Kierstan (4 March 2021). "How to Take Care of Contact Lenses". www.aao.org. Retrieved 5 October 2021.
- ^ "Contact Lens Care Products Labeling - Guidance for Industry and FDA Staff". www.fda.gov. 15 August 2010. Retrieved 5 October 2021.
- ^ "FDA Letter to Firms with Marketing Clearance for No-rub Multipurpose Contact Lens Solutions". www.fda.gov. 19 May 2009. Retrieved 5 October 2021.
- ^ Razmaria, Aria A. (2015). "Proper Care of Contact Lenses". JAMA. 314 (14): 1534. doi:10.1001/jama.2015.12468. PMID 26462011.
- ^ Carnt, Nicole A.; Subedi, Dinesh; Connor, Sophie; Kilvington, Simon (11 March 2020). "The relationship between environmental sources and the susceptibility of Acanthamoeba keratitis in the United Kingdom". PLOS ONE. 15 (3): e0229681. Bibcode:2020PLoSO..1529681C. doi:10.1371/journal.pone.0229681. PMC 7065798. PMID 32160218.
- ^ Wilson-Holt, N; Dart, J K G (September 1989). "Thiomersal keratoconjunctivitis, frequency, clinical spectrum and diagnosis". Eye. 3 (5): 581–587. doi:10.1038/eye.1989.91. PMID 2630335.
- ^ a b Stamler, John F. (August 1998). "The complications of contact lens wear". Current Opinion in Ophthalmology. 9 (4): 66–71. doi:10.1097/00055735-199808000-00012. PMID 10387472.
- ^ "Do Contact Lenses Damage The Eye?". Lensite. Archived from the original on 2 October 2018. Retrieved 30 March 2018.
- ^ "What's the Best Prescription for Healthy Contact Lens Wear?". Contact Lens Spectrum.
- ^ Sweeney, Deborah F. (2013). "Have Silicone Hydrogel Lenses Eliminated Hypoxia?". Eye & Contact Lens: Science & Clinical Practice. 39 (1): 53–60. doi:10.1097/ICL.0b013e31827c7899. PMID 23271474. S2CID 205659587.
- ^ Khan, Feras H (13 April 2023). "Emergency Care of Corneal Abrasion: Overview, Clinical Evaluation, ED Treatment Considerations". Medscape Reference. Retrieved 25 August 2024.
- ^ Liu, Z.; Pflugfelder, S. (January 2000). "The effects of long-term contact lens wear on corneal thickness, curvature, and surface regularity". Ophthalmology. 107 (1): 105–111. doi:10.1016/S0161-6420(99)00027-5. PMID 10647727.
- ^ Liu Z, Pflugfelder SC (January 2000). "The effects of long-term contact lens wear on corneal thickness, curvature, and surface regularity". Ophthalmology. 107 (1): 105–11. doi:10.1016/S0161-6420(99)00027-5. PMID 10647727.
- ^ Hollingsworth JG, Efron N (June 2004). "Confocal microscopy of the corneas of long-term rigid contact lens wearers". Cont Lens Anterior Eye. 27 (2): 57–64. doi:10.1016/j.clae.2004.02.002. PMID 16303530.
- ^ Zhivov A, Stave J, Vollmar B, Guthoff R (January 2007). "In vivo confocal microscopic evaluation of langerhans cell density and distribution in the corneal epithelium of healthy volunteers and contact lens wearers". Cornea. 26 (1): 47–54. doi:10.1097/ICO.0b013e31802e3b55. PMID 17198013. S2CID 22951471.
- ^ Moreddu R, Elsherif M, Butt H, Vigolo D, Yetisen AK (2019). "Contact lenses for continuous corneal temperature monitoring" (PDF). RSC Advances. 9 (20): 11433–11442. Bibcode:2019RSCAd...911433M. doi:10.1039/C9RA00601J. PMC 9063335. PMID 35520262.
- ^ Baghban, R; Talebnejad, MR; Meshksar, A; Heydari, M; Khalili, MR (2 November 2023). "Recent advancements in nanomaterial-laden contact lenses for diagnosis and treatment of glaucoma, review and update". Journal of Nanobiotechnology. 21 (1): 402. doi:10.1186/s12951-023-02166-w. PMC 10621182. PMID 37919748.
- ^ Robertson, DM, Petroll, WM, Jester, JV & Cavanagh, HD: Current concepts: contact lens related Pseudomonas keratitis. Cont Lens Anterior Eye, 30: 94–107, 2007.
- ^ Sharma, S, Kunimoto, D, Rao, N, Garg, P & Rao, G: Trends in antibiotic resistance of corneal pathogens: Part II. An analysis of leading bacterial keratitis isolates, 1999.
- ^ Verhelst D, Koppen C, Looveren JV, Meheus A, Tassignon M (2005). "Clinical, epidemiological and cost aspects of contact lens related infectious keratitis in Belgium: results of a seven-year retrospective study". Bull Soc Belge Ophtalmol. 297 (297): 7–15. PMID 16281729.
- ^ Burd EM, Ogawa GSH, Hyndiuk RA. Bacterial keratitis and conjunctivitis. In: Smolin G, Thoft RA, editors. The Cornea. Scientific Foundations and Clinical Practice. 3rd ed. Boston: Little, Brown, & Co, 1994. p 115–67.
- ^ Zaidi T, Mowrey-McKee M, Pier GB (2004). "Hypoxia increases corneal cell expression of CFTR leading to increased Pseudomonas aeruginosa binding, internalization, and initiation of inflammation". Invest Ophthalmol Vis Sci. 45 (11): 4066–74. doi:10.1167/iovs.04-0627. PMC 1317302. PMID 15505057.
- ^ Sweeney DF, Keay L, Jalbert I. Clinical performance of silicone hydrogel lenses. In Sweeney DF, ed. Silicone Hydrogels: The Rebirth of Continuous Wear Contact Lenses. Woburn, Ma: Butterworth Heinemann; 2000.
- ^ Kodjikian L, Casoli-Bergeron E, Malet F, Janin-Manificat H, Freney J, Burillon C, Colin J, Steghens JP (2008). "Bacterial adhesion to conventional hydrogel and new silicone hydrogel contact lens materials". Graefes Arch Clin Exp Ophthalmol. 246 (2): 267–73. doi:10.1007/s00417-007-0703-5. PMID 17987309. S2CID 23218590.
- ^ Santos, Lívia; Rodrigues, Diana; Lira, Madalena; Real Oliveira, M Elisabete C. D.; Oliveira, Rosário; Vilar, Eva Yebra-Pimente; Azeredo, Joana (July 2008). "Bacterial Adhesion to Worn Silicone Hydrogel Contact Lenses". Optometry and Vision Science. 85 (7): 520–525. doi:10.1097/OPX.0b013e31817c92f3. hdl:1822/8740. PMID 18594343. S2CID 10171270.
- ^ Burgener, Katherine; Bhamla, M. Saad (June 2021). "A polymer-based technique to remove pollutants from soft contact lenses". Contact Lens and Anterior Eye. 44 (3): 101335. arXiv:2005.08732. doi:10.1016/j.clae.2020.05.004. PMID 32444249. S2CID 218673928.
- ^ Agarwal R.K. (1971). "A legally problematical but clinically interesting contact lens case". The Contact Lens. 3 (3): 13.
- ^ Yung MS, Boost M, Cho P, Yap M (2007). "Microbial contamination of contact lenses and lens care accessories of soft contact lens wearers (university students) in Hong Kong". Ophthalmic and Physiological Optics. 27 (1): 11–21. doi:10.1111/j.1475-1313.2006.00427.x. hdl:10397/22844. PMID 17239186. S2CID 6552480.
- ^ Midelfart J.; Midelfart A.; Bevanger L. (1996). "Microbial contamination of contact lens cases among medical students". CLAO J. 22 (1): 21–24. PMID 8835064.
- ^ Gray T.B.; Cursons R.T.; Sherwan J.F.; Rose P.R. (1995). "Acanthamoeba, bacterial, and fungal contamination of contact lens storage cases". Br J Ophthalmol. 79 (6): 601–605. doi:10.1136/bjo.79.6.601. PMC 505174. PMID 7626578.
- ^ Amos CF, George MD (2006). "Clinical and laboratory testing of a silver-impregnated lens case". Cont Lens Anterior Eye. 29 (5): 247–55. doi:10.1016/j.clae.2006.09.007. PMID 17084102.
- ^ Mathews SM, Spallholz JE, Grimson MJ, Dubielzig RR, Gray T, Reid TW (2006). "Prevention of bacterial colonization of contact lenses with covalently attached selenium and effects on the rabbit cornea". Cornea. 25 (7): 806–14. doi:10.1097/01.ico.0000224636.57062.90. PMID 17068458. S2CID 25006245.
- ^ Santos L; Rodrigues D; Lira M; Oliveira R; Oliveira Real, ME; Vilar EY; Azeredo J (2007). "The effect of octylglucoside and sodium cholate in Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to soft contact lenses". Optom Vis Sci. 84 (5): 429–34. doi:10.1097/opx.0b013e318058a0cc. hdl:1822/6663. PMID 17502827. S2CID 2509161.
- ^ a b "Contacts Release Anesthesia to Eyes of Post-Surgery Patients". Archived from the original on 21 April 2013. Retrieved 4 April 2013.
- ^ "First Ever Switchable Telescopic Contact Lens". Forbes. Retrieved 23 March 2018.
- ^ Klepper, Robert K. (2005). Silent Films, 1877–1996: A Critical Guide to 646 Movies. McFarland. p. 373.
- ^ Yazigi, Monique P. (17 July 1994). "On Film, Them There Eyes Are Often Contact Lenses". New York Times.
Further reading
[edit]- Efron, Nathan (2002). Contact Lens Practice. Elsevier Health Sciences. ISBN 0-7506-4690-X.
- Heitz, Robert (2003, 2005 and 2014). "The History of Contact Lenses". In: Julius Hirschberg, History of Ophthalmology, vols. 11/3a, 11/3b, and 11/3c. Ostend, Belgium: Wayenborgh Publishing; Paraguay: Piribebuy. ISBN 978-90-6299-463-2.
External links
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)